IP-2 SERIES HIGH FREQUENCY
CURRENT SENSOR
The IF-2 series is a new Line of high frequency current sensors that are used to measure current on small conductors that may be passed through the aperture. Their small size minimizes the physical constraints of usual measurements and the choice of three sensitivities allows for a variety of outputs. The flat response over a wide band is unparalleled compared with similar sensors. A short single ended output with an SMA connector is standard but all models can also be ordered with a differential type output. Modifications to the output length and connector type can be made with little impact to cost.
The relationship between the Sensed current and output voltage is:
Vout = Zt x I sensed
where Zt = Transfer Impedance
ELECTRICAL SPECIFICATIONS
| IP-2-1 | IP-2-5 | IP-2-10 | |
| Freq. Range(3db pts): | 100KHz-1.3GHz | 125KHz-800MHz | 500KHz-1GHz |
| Transfer Impedance(Zt): | 1 ohm | 5 ohms | 10 ohms |
| Current Handling Cap.: | .8 amps (RMS) | .8 amps (RMS) | .8 amps (RMS) |
| Output Impedance: | 50 ohms | 50 ohms | 50 ohms |
| Standard Connector.: | SMA | SMA | SMA |
PHYSICAL SPECIFICATIONS
Mass: 7.2 grams
Dimensions in inches
