PTD-1, PTD-2 & PTD-3
CURRENT PROBE TEST DEVICE
The PRODYN PTD-1 is a device designed to test and calibrate the PRODYN I-300, I-310, and I-320 spring clamp-on type current probes. When probes are clamped over the conductor, current is driven through the probe from one connector and is terminated on the other with a matching impedance across bandwidth of generator used, thereby drawing full load current through the probe.
PTD-2 & PTD-3
CURRENT PROBE TEST DEVICE
The PRODYN PTD-2 and PTD-3 are easy to use two-piece devices designed to test and calibrate current probes larger than the spring clamp-on probes. Current is driven through the probe from one connector and is terminated on the other with a matching impedance across bandwidth of generator used, thereby drawing full load current through the probe.
The PTD-2 will accommodate the Kwik-Latch® I-125 series (or the 94430 and 91550 series) current probes. The PTD-3 will accommodate the Kwik-Latch®
I-262 series (or the 93686 and 94456 series) current probes.
|
Specifications
|
PTD-2
|
PTD-3
|
| Probe Aperture Diameter (in.) |
.75, 1.25
|
2.62, 4.00
|
| Connectors |
Type N
|
Type N
|
| VSWR with Probe |
1.2:1, 0-250 Mhz
|
1.5:1, 0-150 Mhz
|
| Dimensions (in.) L |
4.5
|
8.0
|
|
W
|
2.5
|
3.2
|
|
H
|
4.5
|
8.0
|
